Ви є тут

Головна

4 вересня у м. Потсдамі розпочалася VI Міжнародна Конференція з автоклавного газобетону ICAAC 2018 за участю делегації ВААГ

Дата: 

4.09.2018

 

4-6 вересня у м. Потсдамі, Німеччина проходить VI Міжнародна Конференція з автоклавного газобетону ICAAC 2018.

 

Група міжнародних наукових експертів, дослідників і виробників з 41 країни вирушили сюди, щоб обговорити
завдання галузі, а також отримати уявлення про тенденції, нововведення і проблеми, пов'язані з автоклавним газобетоном.

 

Від України в конференції ICAAC 2018 активно бере участь делегація ВААГ.

 

 

 

 

Наукова програма конференції:

4 вересня 2018

 

13:30 – 18:35 СТРУКТУРНІ ВЛАСТИВОСТІ, зал 1

13:30 – 18:35 СЕЙСМІЧНІ КОНСТРУКЦІЇ ТА НАДІЙНІСТЬ, зал 2

13:30 – 15:35 МІЦНІСТЬ, зал 3

15:50 – 18:35 МЕТОДИ ДОСЛІДЖЕНЬ, КОДИ, СТАНДАРТИ, зал 3

18:35 – 18:45 ПІДВЕДЕННЯ ПІДСУМКІВ, все залы

 

5 вересня 2018

 

9:00 – 16:15 СТІЙКІСТЬ - МОЖЛИВОСТІ ТА РЕАЛІЗАЦІЯ, зал 1

9:00 – 10:40 СТРУКТУРНІ ВЛАСТИВОСТІ, зал 2

9:00 – 12:40 СИРОВИНА зал 3

11:00 – 14:45 ТЕХНОЛОГІЯ ВИРОБНИЦТВА ТА ЗАСТОСУВАННЯ, зал 2

13:30 – 16:15 МІНЕРАЛОГІЯ ТА ХІМІЯ, зал 3

16:15 – 16:25 ПІДВЕДЕННЯ ПІДСУМКІВ, зал 1 и 3

 

6 вересня 2018

 

9:00 – 12:40 ТЕПЛО-, ВОЛОГО-,  ЗВУКОВИЙ ЗАХИСТ зал 1

9:00 – 12:40 ЦИФРОВЕ МОДЕЛЮВАННЯ, зал 2

9:00 – 10:40 ГЛОБАЛЬНІ ЗАВДАННЯ ТА РІШЕННЯ ПРИ ПРОЕКТУВАННІ КОНСТУКЦІЙ З АВТОКЛАВНОГО ГАЗОБЕТОНУ, зал 3

11:00 – 12:40 ПОРИСТІСТЬ ТА СОРБЦІЯ зал 3

13:30 – 14:30 ПІДВЕДЕННЯ ПІДСУМКІВ, зал 1
 

Лекції учасників конференції

 

LECTURES DIGITALISATION, MODELLING AND SIMULATIONS

The spread of concentrated loads on AAC using digital image correlation techniques.pdf  Clifford Fudge, Geoff Edgell

Six sigma in the AAC production.pdf  Martin Haas, Ivaylo Petrov

Simulation of AAC for sustainable design and construction  Jason T. Kirby Fouad H. Fouad Torsten Schoch

Automation goes 4.0: The “SMART” AAC factory Frank Pottin Dipl.‐Ing. Torsten Dietz

 

 

LECTURES DURABILITY

Effect of carbonation on the performance of autoclaved aerated concrete  Katarzyna Łaskawiec, Piotr Woyciechowski

Durability of autoclaved aerated concrete—if carbonation is really dangerous? Facts and myths  Paweł Walczak, Jan Małolepszy

Carbonation of autoclaved aerated concrete containing fly ash  Bernd Winkels Dipl.‐Ing. Holger Nebel Dr. rer. nat. Michael Raupach Univ.‐Prof. Dr.‐Ing.

Durability of autoclaved aerated concrete based on Polish experience Genowefa Zapotoczna‐Sytek

 

 

LECTURES GLOBAL CHALLENGES AND SOLUTIONS OF STRUCTURAL ENGINEERING WITH AAC

Past and future of Hebel Haus in Japan  Kouji Kuroki

Production and use of autoclaved aerated concrete in Russia  G. I. Grinfel'd, A. A. Vishnevsky, A. S. Smirnova

 

 

LECTURES HEAT‐, MOISTURE‐ AND SOUND‐PROTECTION

Performance of Multipor WI as exterior insulation  Svenja Carrigan Jun.‐Prof. Dr. rer. nat, Marco Hartner Dipl.‐Ing., Markus Hofmann Dipl.‐Ing., Oliver Kornadt Prof. Dr. rer. nat., Torsten Schoch Dipl.‐Ing.

Hygrothermal assessment of internally insulated solid masonry walls fitted with exterior hydrophobization and deliberate thermal bridge  Nickolaj Feldt Jensen, Søren Peter Bjarløv, Carsten Rode, Tommy Riviere Odgaard

Effects of thermal insulation on the airborne sound insulation of AAC masonry walls  Julian Kümmel

Autoclaved aerated concrete: Influence of heat storage capacity on thermal performance and thermal comfort  Tim Schöndube MSc, Saif Rashid MSc, Svenja Carrigan Jun.‐Prof. Dr. rer. nat., Torsten Schoch Dipl.‐Ing., Oliver Kornadt Prof. Dr. rer. nat.

An innovative application of autoclaved aerated concrete technology  Frank W. Riepe​

 

 

LECTURES MINERALOGY AND CSH‐CHEMISTRY

Quality control of autoclaved aerated concrete by means of X‐ray diffraction  Marcus Paul

XRD analysis of phase development and peak broadening during the production of AAC  Juergen Schreiner, Daniel Jansen, Dominique Ectors, Stephan Volkmann

Nanostructured high insulating autoclaved aerated concrete  Andreas Stumm, Uwe Schweike, Peter Stemmermann

Early hydration process of the cement–lime system  Hui Zhang, Yufeng Su PhD, Zhenghong Yang PhD, Xiong Zhang PhD

Autoclaving of ultra‐high performance concrete (UHPC)  Julia von Werder, Sebastian Simon, Christian Lehmann, Christian Selleng, Patrick Fontana, Birgit Meng
 

 

LECTURE MORTARS, PLASTERS AND RENDERS

Requirements for renders on modern autoclaved aerated concrete  Andrea Hartmann, Franz Loderer

 

 

LECTURES POROSITY AND SORPTION PROPERTIES

Investigations about porosity analyzing of AAC  Nicole Anders

Length change characteristics of autoclaved aerated concrete and other porous media based on pore structure  Kunio Matsui, Shingo Asamoto, Akihiro Ogawa​

Length change behavior of autoclaved aerated concrete at various relative humidity: Comparison between Japanese and Vietnamese AACs  Lam Nguyen Trong MSc, Shingo Asamoto PhD, Kunio Matsui PhD

 

 

LECTURES PRODUCTION AND PROCESS ENGINEERING

Minimizing AAC production hard waste costs: A hybrid IMSD and DfE approach in machine‐building industry  Hatem Aldarrat, Billy Özer Cogum, Lorenz Reupke​

Customized AAC equipment based on various demands Shunwu Xu, Xinjiang Chen, Guoliang Qi

Improvement of the mixing process and the influence on the AAC properties  Christoph Menzel​

Factors affecting the stability of bubble in autoclaved aerated concrete  Yufeng Su PhD, Bolei Wei, Xuan Sun, MSc Hui Zhang​

Highly automated versatile volume production of autoclaved aerated panels  Daan van Boggelen, Koen van Boggelen, Ralf Beier​

 

 

LECTURES RAW MATERIALS

Usability of chemical additives to accelerate initial curing time of AAC  Tuğba Dalgıçer MSc, Taner Kavas, Uğur Uzgan

Zeolite as a raw material to the AAC production  Ewelina Grabowska

Poromix AAC additive – A new front in AAC development  Wojciech Jan Horała​

Aluminum silicate recycling raw materials for production of autoclaved aerated concrete  Fumiaki Matsushita, Kouichi Imasawa, Sumio Shibata, Masatoshi Horiguchi​

Quicklime with defined reaction time window for aerated autoclaved concrete production  Dmitry Tungulin, Birgit Behrenberg, Jürgen Lutter, Werner Wallmeier​

Influence of gypsum and limestone, used as mineral additives, on autoclaved aerated concrete properties  Marek Małecki, Wiesław Kurdowski, Paweł Walczak​

Chemical admixtures for the optimization of the AAC production  Nicoletta Zeminian MSc, Gaetano Guarino MSc, Qi Xu PhD​

 

 

LECTURES SEISMIC DESIGN AND RELIABILITY

Seismic response of autoclaved aerated concrete masonry infill walls under in‐plane and out‐of‐plane seismic demands  Baris Binici, Erdem Canbay, İsmail Ozan Demirel, Alper  Aldemir, Uğur Uzgan, Zafer Eryurtlu, Ahmet Yakut

EGAS: An innovative earthquake‐proof AAC wall system  Erdem Canbay, Baris Binici, Ismail Ozan Demirel PhD, Alper Aldemir, Uğur Uzgan, Zafer Eryurtlu, Koray Bulbul

In situ seismic testing of a reinforced autoclaved aerated concrete building  Furkan Gokmen MSc, Baris Binici, Erdem Canbay, Alper Aldemir, Mustafa Kagan Ogdu, Uğur Uzgan, Zafer Eryurtlu, Gulay Ozdemir

Seismic behavior of reinforced autoclaved aerated concrete wall panels  Armin Taghipour MSc, Erdem Canbay, Baris Binici, Alper Aldemir, Uğur Uzgan, Zafer Eryurtlu

Damage reduction system for masonry infill walls under seismic loading  Christoph Butenweg, Marko Marinković​

From experiments to seismic design rules for structures built with reinforced autoclaved aerated concrete panels  Omer Faruk Halici MSc, Korhan Deniz Dalgic, Ozgun Ozeren, Koray Ugurlu, Cem Demir, Mustafa Comert, Alper Ilki

Shaking table test study on a steel frame with autoclaved aerated concrete walls  Caiyuan Cheng, Liusheng He​

Seismic out‐of‐plane behavior of unreinforced masonry walls  Moritz Lönhoff, Hamid Sadegh‐Azar

Seismic performances of AAC masonry: A review of experimental and numerical approaches  Lorenzo Miccoli​

Seismic performance of AAC masonry infill: From traditional systems to innovative solutions  Riccardo R. Milanesi PhD, Paolo Morandi PhD, Andrea Penna, Guido Magenes​

 

 

LECTURES STRUCTURAL PROPERTIES

Tests of AAC walls subjected to vertical loads ‐ Part 1. Zone at the opening  Łukasz Drobiec

Tests of AAC walls subjected to vertical loads ‐ Part 2. Connection zone of perpendicular walls  Łukasz Drobiec

Joints in masonry walls  Iwona Galman, Radosław Jasiński

Structural performance of AAC hybrid floor system Chikara Iihoshi, Takashi Sugawara, Manabu Sonobe, Hirokazu Kobayashi​

Comparisons of confined and different types of reinforcement on the behavior of masonry shear walls  Radosław Jasiński PhD​

Analysis of AAC precast lintels embedded in walls different construction  Łukasz Drobiec Radosław Jasiński Wojciech Mazur

Reinforced and unreinforced AAC masonry walls supported on deflecting structure  Adam Piekarczyk​

Flexural strength of AAC masonry with bed joint reinforcement  Adam Piekarczyk

The design of storey height elements for the inner leaf of masonry cavity walls  John Roberts, Cliff Fudge​

Effect of filling joints on resistance of walls under vertical loading  Tomasz Rybarczyk, Łukasz Drobiec​

Influence of reinforced concrete confining on the load‐bearing capacity of the AAC walls  Łukasz Drobiec, Tomasz Rybarczyk​

Wall–floor–wall interaction considering fill units: Fill units can contribute to the vertical load transfer — A proposal  Peter Schöps

 

 

LECTURES SUSTAINABILITY ‐ OPPORTUNITIES AND IMPLEMENTATIONS

Options for the implementation of new secondary raw materials in autoclaved aerated concrete  Vít Černý PhD, Rostislav Drochytka CSc, MBA Pavlína Šebestová

Influence of secondary raw materials on synthesis of tobermorite in lime–silicate composite  Vít Černý PhD, Rostislav Drochytka CSc, MBA Karel Kulísek CSc, Jana Húšt'avová

Recycling of steel slag fines for the production of autoclaved aerated concrete (AAC)  Ying‐Liang Chen, Juu‐En Chang, Yi‐Chieh Lai, Ming‐Sheng Ko, Yi‐Hsin Chen

Autoclaved aerated concrete (AAC) rubble for new recycling building products: In dry premixed mortars for masonry, in masonry blocks, and in lightweight blocks Frank Hlawatsch, Hakan Aycil, Jörg Kropp​

Circular economy potential for autoclaved aerated concrete  Oliver Kreft PhD​

Removal of the greenhouse gas methane by using autoclaved aerated concrete as matrix for colonization of methane‐oxidizing bacteria  Jan Kuever, Markko Remesch, Andreas Rabenstein, Gerhard Bukowski, Harald Kurkowski, Wolfgang Eden

ENSUBA–A new method for solving the gypsum problem in waste autoclaved aerated concrete  Anna‐Lena Liesch MSc, Volker Thome, Sebastian Dittrich​

UHPC–AAC facade elements: Structural design, production technology, and mechanical behavior  Lorenzo Miccoli, Patrick Fontana, Dirk Qvaeschning, Oliver Kreft, Johannes Hoppe, Birgit Meng​

The sustainability of wall solutions: Life Cycle Assessment (LCA) of different solutions for external closures  Michele Paleari PhD, Alessandro Miliani MSc​

Application of recycled waste material for the production of autoclaved aerated concrete  Severin Seifert, Anna‐Lena Liesch, Volker Thome, Sebastian Dittrich, Daniela Wolfram​

Improving the recyclability, environmental compatibility, and CO2 balance of autoclaved aerated concrete by replacing sulfate carrier and cement with calcined clays  Carola Chucholowski, Müller Holger, Karl‐Christian Thienel

Sustainable building solutions with new generation autoclaved aerated concrete panel applications  Willem van Boggelen Dipl.‐Ing., Jop van Boggelen MSc

Demolition waste and limit values for landfill  Hartmut B. Walther​

 

 

LECTURES TEST METHODS, CODES AND STANDARDS

Investigation of the strength development of autoclaved aerated concrete  Ulrike Peter, Pawel Nowak, Hermann Oeinck, Volker Spicker, Christopher Pust​

The use of EN771‐4 the European harmonized AAC masonry unit product standard in the UK  Peter Primmer​

Use of European harmonized AAC masonry unit test standards in the UK  Peter Primmer​

Testing boundary conditions determining the drying shrinkage behavior of AAC  Patrick Rzeczkowski, Ludger Lohaus

​Compressive strength of autoclaved aerated concrete: Test methods comparison  Paweł Walczak​

 

 

POSTER

Effects of different autoclaving pressure on mechanical properties of AAC  Atilla Yazal, Taner Kavas A., Doğan Soyal

 

APPENDIX

AAC in the USA – A second look  Fouad H. Fouad, Torsten Schoch

Innovations in the crystalline structure forming and its effects on the mechanical performance of AAC  Taner Kavas, Abdullah Tan, Utku Tiriç, Abdullatif Durğun​

Size effect of monotonically sheared masonry walls made of AAC masonry units  Radosław Jasiński​

Research of transformation process of barrier layers in antifriction bearing with solid lubricating filler at autoclave simulated operation  Valeriy Perevertov​